Ana içeriğe geç

Model No. A1367 / 8, 16, 32, or 64 GB capacity

914 Soru Tümünü görüntüle
Soru Kapandı

After screen replacement, screen don't turn on and device gets hot.

I have replaced some iPod touch screens in the past, all successfully. But this last one, when I tried to turn it on, it didn't show anything on screen, so I re-opened it to find that it gets very hot in the section below the front camera.

Also, iTuenes don't recognize it.

Can somebody help please?

Thanks.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:

got very hot below the front camera? perhaps the logic board got heated. check it

Bu yanıt yardımcı oldu mu?

Puan 0

8 Yorum:

This is the place that gets hot: http://imgur.com/YSxTK

tarafından

yes, that's what i thought, it's CPU there. how long have you used it? your lcd is newly replace and no problem right?

tarafından

Yeah, its a new lcd. But it doesn't turn on.

tarafından

can you check out is it the problem with you logic board or your new lcd?

tarafından

It's not the lcd, because the old screen neither turns on.

tarafından

3 tane daha yorum göster

Yorum Ekle

I've had this in the past with iPod's that suffer from water damage. I most cases the chip that handles the display functionalities got fried due to the water spill.

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Nope, no water spill in this iPod. The only thing I did is replace the broken screen.

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 866