CDMA version of the fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. 16 or 32 GB / Model A1349 / CDMA compatibility.

421 Soru Tümünü görüntüle

Home Button Without Replacing Cable

I want to switch colors of my digitizer. The kit I am looking at just has the button not the whole Home Button Assembly. How is this button held on to the cable, the standard adhesive they use to hold other parts on? Do you remove the button with a heat gun? TIA

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Yes, it is held by the standard double-sided adhesive that Apple uses in many places of the iPhone. Gentle use of a heat gun can be used but is not necessary. Just carefully pry the Home Button part you touch from the Ribbon part.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

AddDumb sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 385