Ana içeriğe geç

Model No. A1367 / 8, 16, 32, or 64 GB capacity

1300 Soru Tümünü görüntüle

HOw do I connect the top part of the volume/lock ribbon cable?

I soldered the ribbon cable down to the logic board by the volume buttons, but I am a bit confused as to how I connect the upper part of the ribbon cable (The part that is for the lock button). Is there soldering involved, can someone please help me? Thank you!

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

iPhone X Fix Kits

Warranty up? No worries, we’ve got the fix.

Hemen Alışveriş Yapın

iPhone X Fix Kits

Warranty up? No worries, we’ve got the fix.

Hemen Alışveriş Yapın

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hey Federico,

There is no soldering involved. There are two screws on the top holding power/lock button bracket in place. What I usually do is to first put the whole cable in place. So first screw in the lock button after screw in the volume button and than at the end I solder it to the board.

Hop that makes sense.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

federico sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 421