Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1959 Soru Tümünü görüntüle

How do I replace the light in my iPhone 3GS

When i was out biked i lost my iPhone in a pothole i have cleaned it and everything work except the ligt in the iPhone, i can`t se anything on the iphone but everything else works. So my question is how to replace the light in the iPhone so i can use it again.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Lars, in order to get your light to work again, there are a few possibilities. The first one, and that is where I would start with, is to disassemble your iPhone. Take a look at all the connectors and make sure that the cables are properly seated. If they are, you may have to change the LCD, since that is the part that lights up. If by any chance it still does not work, you may need a new backlight coil (or a backlight IC) which is soldered onto the logic board. Hope this helps, good luck.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Lars sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 464