Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3287 Soru Tümünü görüntüle

LCD Replacement no display

Hi,

I followed your steps for front screen assembly after I cracked my screen. Before replacing my display was still working. After replacement, my phone still works - lights up and makes relevant noises when messages come in but no display.

I have tried hard resetting and disconnecting battery.

I can see when the phone is on two small pixels, if i was to describe it, it would be the reverse of a dead pixel, they light up but the remainder fo the screen does not.

Thanks

Mart

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

LCD iPhone Ekran Tamir Kit'leri

Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

Shop Kits

LCD iPhone Ekran Tamir Kit'leri

Onarım maliyetlerini düşürün, kaliteyi değil.

Shop Kits

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

It sounds like it might not be plugged into the motherboard correctly, or the new screen was bad or there was some damage done installing it, I would start by checking the connections, good luck

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

I just went through and tested everything was connected properly - and it all seems OK. So it could be one of the last two things you mentioned. Thanks for your response.

tarafından

Your welcome Mart and if you bought your screen on ebay or amazon that could be your problem, I have bought a lot of bad screens there and will no longer purchase any parts from either of them.

tarafından

Where do you recommend getting one from Mitch? It was of Amazon :)

tarafından

Either on here or here is a link, https://www.gounlock.com/details.php?ite... , Amazon is the worst for screens, the only good thing is its easy to return them, good luck and keep me posted.

tarafından

Yorum Ekle

Did you remove the front totally again? Because if you managed to scratch the display-cables when installing the LCD then it won't work.

Most likely it's a LCD that's not working.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Mart Dingley sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 817