İtibar: 119
4
1
Please refer to the following manual for the screw I am referring to:
iPhone 4S, Headphone Jack Cable, Step 32
The screw head is stripped. Im looking for a way to get this thing out and replace it. Drilling and tapping is out I assume because its so dang small. Any help would be appreciated.
Thanks
Bu iyi bir soru mu?
İtibar: 11,6b
29
27
23
If you hold the back of the phone and push up while pressing down to loosen the screw. A small flat tip precision screwdriver typically works.
Superglue will work. I always prefer the Gel type.
I keep a bottle of ScrewGrab in the shop, you can find it on Amazon.
Bu yanıt yardımcı oldu mu?
You guys rock. Thanks for the tips. Ill give them a shot.
You could try using super glue or a similar epoxy to bind it to your screwdriver, then replace the screw with a new one. I suggest something along the lines of JB Weld or Loctite. As it's a small area to work with I suggest applying the epoxy to the screwdriver first, not the screw to prevent overflow/spilling onto nearby components! Good luck!
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 1
Her zaman: 337
1 Yorum
iPhone 4S Headphone Jack Cable Replacement
Mitch Rush tarafından