Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı


Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1508 Soru Tümünü görüntüle
Soru Kapandı

iPhone keep restarting after disassemble


I had a question recently due to i need to change my side volume adjustment so i disassemble & after i assemble back my phone start up with apple logo. abt 3 to 5 mins it came out the running cycle behind the logo awhile it restart again.

i had restore with itune was sucess but after a while it repeat again of restarting.

i also did disassemble another iPhone due to changing of battery & assemble back & it same thing happen as above mention,

Is there something wrong with my assemble or is it hardware problem/some parts broken/some parts i did not install properly.

Please help.


Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle


Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits


Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits

1 Cevap

Filtre ölçütü:

I would make sure all of the connections are properly seated. It sounds like the logic board is faulty, but it is unlikely that two logic boards were damaged in this same way, which makes me think something is not connected properly.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,871