Ana içeriğe geç

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Soru Tümünü görüntüle

step #19 on (how to remove logicboard) gold prong (PART NAME)

refer to step #19, how to remove logicboard

I bought a iPhone 4 that had water damage and in the tear down to clean everything with alcohol. I noticed that the little gold prong had what appeared to have rusted or eroded away. that the ifixit.com guides warns you not to damage in step #19 of the iPhone 4 GSM AT&T iphone guide. #

What is this part called?

how is the repair done?

is there a part number?

where can it be bought at?

please provide any and all detailed 411 you can.

I have enclosed a photo pointing to the part and drew a box around it to show it upclose.

thanks for the 411 to any one who replies.

Block Image

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
1 Yorum

Gary, from your images, this is a 4S.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Gary, thanks for the images. What seems to be missing from your board is a spring "SP1_RF 1.0X1.85MM SM-NSP-OBLONG" It does provide ground to the antenna. Now we just have to find a replacement, could be a bit of a "needle-in-a-haystack" hunt :) Hope this helps, good luck

Block Image

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Gary sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 397