Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3252 Soru Tümünü görüntüle

After display assembly replacement middle of screen not touch sensitiv

After replacement of the display assembly the middle of the screen, a finger width area across the screen left to right is no responsive. Brightness, color and contrast of screen are all great.

I followed the instructions in great detail and made sure to have the appropriate surfaces clean before reassembly.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

jordenthompson, it is my experience that whenever a certain part of the digitizer is unresponsive, the digitizer has failed. There is most likely due to a broken circuit within the digitizer. Return it to the vendor for a replacement. This type of failure is becoming more frequent and is not uncommon. Hope this helps, good luck.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

jordenthompson sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 148