After replacing my ipad 2 broken screen, about 1 cm from the bottom of the touch is not responsing. The rest of the Ipad touch screen is working. I found a a small scratch on the digitizer screen. Would that be the problem?
Bu iyi bir soru mu?
İtibar: 782,1b
1,1b
893
2,3b
peckha, I am sure it is not the scratch that gives you problems, but it is most likely indicative of a fractured digitizer circuit. This happens actually quite frequently. I would suggest that you contact the vendor and have the digitizer replaced. Hope this helps, good luck.
Bu yanıt yardımcı oldu mu?
Thanks for the answer. I mis-spoke about the scratch. I found a small tiny scratch on the LCD screen. Would you think that is the problem?
Same problem. If there is a certain area that is unresponsive to touch it is most likely a bad circuit.
I appreciate the response. Thank you. I have put a request for replacement and return.
It is not the scratch on the LCD that causes your digitizer to have failed :-)
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 1,255
