How to fix xbox 2nd time 3 rrods

hi guys,

i m shashank.................

i need an guide for my xbox to repair its 3 rrod as it get red light again. but i have installed rrod kit later. if u suggest me to reball it then also guide me how i can fix it for myself. please help me............

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

shashank, remember that all that this kit is trying to accomplish, is to close cracked solder joints. Most of the time the extra few pounds of torque provided by the kit, will close those cracked joints. It is not a permanent fix, nor is it a sure thing either. It all depends on the individual logic board and the damage to the solder joints. I strongly suggest a reflow with this kit. The chances to be successful is greater with a combination of RROD kit and a reflow. Here is a guide for the reflow. Of course, a permanent fix would be a total reball. for a reball to be done, you will need the stencil, a rework machine as well as the proper reball temperature template. If you do not have those tools, you can not do a reball. This will give you a pretty good idea on how to do it. Hope this helps, good luck.

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

Brother, is this fix is the permanant fix for my xbox and i have no heat

gun for this process but have hair drier of 1200 ws.

tarafından

A hair dryer will not give you enough heat. You do need a heat gun for that.

tarafından

Yorum Ekle

Yanıtını ekle

shashank sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 271