Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

597 Soru Tümünü görüntüle

fried IC on logic board while replacing hard drive


Long story short, I didn't notice one of the display conductive cushions fell between display and the logic board when i was assembling the iMac, so when i turned it on it fried one of the IC's on it. It's working, but has 8 bit or so color range on the internal display. I can replace the IC, but it fried so bad, i can't see the marking on it.

My question is: can anybody tell me that IC label, or what that IC actually is? Photos included.

Thanks in advance!


Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0


What are the last three of your serial number? That will identify your computer better and allow us to find the right motherboard schematic. If you have part number of your motherboard, that would even be better.


S/N YM85134MZE2.

Left sticker on MB says *J585200DQYHZE* 630-8956.

Right sticker *J5851029FK20A* 631-0601.

MB print is APPLE 820-2223-A. Photos included


Yorum Ekle

Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

Mağazamıza Göz Atın

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Andy, the IC U9130 is the TI video switch TS3V340. It is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (EN)\ input. The datasheet is available right here. Hope this helps, good luck.

Block Image

Block Image

Bu yanıt yardımcı oldu mu?

Puan 3


thanks a lot!


Yorum Ekle

Yanıtını ekle

Andy sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 376