Problem getting started without a keyboard

Question

MacBook Pro 15" Unibody Late 2008 & Early 2009

Released October 2008 / 2.4, 2.53, 2.66, 2.8 or 2.93 GHz Core 2 Duo Processor

376 Soru Tümünü görüntüle

Soru Kapandı

Eldoctor62 @eldoctor62

İtibar: 133

6

2

Gönderildi: 6 Mar 2013

Seçenekler

Problem getting started without a keyboard

Hi all,

I have a problem with my macbook pro a1286 2.66 in 2009.

I spilled soda on the keyboard and he would not start.

I wanted to start it with the short-circuit on the motherboard but I can be wrong because there was a spark and the MagSafe LED is off ...

Now I wonder if it is a fuse on the motherboard that is out of service or the MagSafe.

In the photo I surrounded the place where I made the short circuit ..

Thank you!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

1 Yorum

Can you please supply the last three digits of your serial number so we can correctly identify your system

Dan tarafından 6 Mar 2013

Yorum Ekle

1 Cevap

Seçilen Çözüm

Dan @danj

İtibar: 479,1b

Self employed contract worker

35

329

971

Gönderildi: 6 Mar 2013

Seçenekler

Did you open up the keyboard & system so you could clean out all of the spilled soda. Sounds like you have more soda damage to clean up.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

5 Yorum:

Sorry i would like to say "soda" but no "soude"...

on the keyboard is on, I have to change ... But since I like short circuit I have more light on the charger I wonder if I should change as the MagSafe connector or controlling the fuses on the motherboard ... If so, where can they be??

Eldoctor62 tarafından 6 Mar 2013

Lets try this again - Open the system and clean it of anything that does not belong: food, sand, drink, water, coffee, tea, milk ... Use distilled water and isopropyl alcohol to remove what spilled. Make sure the system is fully cleaned and dry before powering (remove the battery and AC charger).

Dan tarafından 6 Mar 2013

Please supply the last three digits of your serial number

Dan tarafından 6 Mar 2013

ok, thank you! my serial number: 642

I want precised that the keyboard is unplugged because it no longer works.

I wanted to start without. adding an external keyboard and mouse.

But I shorted the wrong place and now the LED on the charger will not turn on. Front short it is turned on.

So I damaged a piece ... But which one???

MagSafe connector or fuse??

If you have any ideas

Eldoctor62 tarafından 6 Mar 2013

If you shorted across the wrong pads you could have damaged the main logic board. There is no user removable fuses here to replace. You need to fix the keyboard or replace it and now you may also need to replace the main logic board.

Dan tarafından 6 Mar 2013

Yorum Ekle

Can you please supply the last three digits of your serial number so we can correctly identify your system — Dan
Sorry i would like to say "soda" but no "soude"...

on the keyboard is on, I have to change ... But since I like short circuit I have more light on the charger I wonder if I should change as the MagSafe connector or controlling the fuses on the motherboard ... If so, where can they be?? — Eldoctor62
Lets try this again - Open the system and clean it of anything that does not belong: food, sand, drink, water, coffee, tea, milk ... Use distilled water and isopropyl alcohol to remove what spilled. Make sure the system is fully cleaned and dry before powering (remove the battery and AC charger). — Dan
ok, thank you! my serial number: 642

I want precised that the keyboard is unplugged because it no longer works.

I wanted to start without. adding an external keyboard and mouse.

But I shorted the wrong place and now the LED on the charger will not turn on. Front short it is turned on.

So I damaged a piece ... But which one???

MagSafe connector or fuse??

If you have any ideas — Eldoctor62
If you shorted across the wrong pads you could have damaged the main logic board. There is no user removable fuses here to replace. You need to fix the keyboard or replace it and now you may also need to replace the main logic board. — Dan