I need to purchase the 30 pin LVDS socket for this tablet's connector.

Question

Graphics Tablet

Repair information for graphic tablets. Graphic tablets are also known as digitizers, drawing tablets, drawing pads, digital drawing tablets, pen tablets, or digital artboards.

38 Soru Tümünü görüntüle

Yor1001 @yor1001

İtibar: 23

1

Gönderildi: 13 Mar 2013

Seçenekler

I need to purchase the 30 pin LVDS socket for this tablet's connector.

Stupid me bent a few pins in the lvds socket of a wacom 21 UX. I was since scouring the web to replace the socket that was broken, but came up empty handed.

Maybe someone could point me in the right direction. I've added photos of both the connector and the socket.

The socket seems to have a pitch of about .5mm also the connector seems to be a really small Dupont connector. (I can't find what this is called)

The lcd model is: nl160120bc27 by NEC.

The Connector.

Connector Again

Socket.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 1

2 Comments

any chance you could post an image of the connector and its location on the circuit board? Any numbers on your LCD panel that will help us to identify as much as possible?

oldturkey03 tarafından 13 Mar 2013

The recepticle seems to be something like this.

http://www.digikey.com/product-detail/en...

right angle surface mount pin connector.

I think it's a .5mm pitch instead of 1 though.

Yor1001 tarafından 15 Mar 2013

Yorum Ekle

1 Cevap

Seçilen Çözüm

oldturkey03 @oldturkey03

İtibar: 739,8b

957

854

2,3b

Gönderildi: 15 Mar 2013

Seçenekler

Yor1001, according to the datasheet for your panels it is a DF19G-30P-1H (59 or 99) (Hirose Electric Co., Ltd. (HRS)) available at places like this or even on here. Download the datasheet for the connectors from here. Hope this helps, good luck

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

6 Comments:

Thank You!!! That's definitely it!!! I forgot to check the datasheets... DUH. (I have it downloaded too)

Yor1001 tarafından 16 Mar 2013

Thank you for accepting my answer. Best of luck to you.

oldturkey03 tarafından 16 Mar 2013

EDIT!! May I ask where did you find this connector in the datasheet, I've did a search and couldn't find any results?

Yor1001 tarafından 16 Mar 2013

It is in the datasheet for your LCD. It shows the importance of posting as much information as possible.

oldturkey03 tarafından 16 Mar 2013

Yeah, I found it in the datasheet, it does show the importance or posting info. (I did post the pictures but did't realized I had to insert them into the posting), thanks again, just ordered the parts, now I hope I don't damage the pads more than how they are already damaged.

Yor1001 tarafından 17 Mar 2013

1 tane daha yorum göster

Yorum Ekle

any chance you could post an image of the connector and its location on the circuit board? Any numbers on your LCD panel that will help us to identify as much as possible? — oldturkey03
The recepticle seems to be something like this.

http://www.digikey.com/product-detail/en...

right angle surface mount pin connector.

I think it's a .5mm pitch instead of 1 though. — Yor1001
Thank You!!! That's definitely it!!! I forgot to check the datasheets... DUH. (I have it downloaded too) — Yor1001
EDIT!! May I ask where did you find this connector in the datasheet, I've did a search and couldn't find any results? — Yor1001
It is in the datasheet for your LCD. It shows the importance of posting as much information as possible. — oldturkey03
Yeah, I found it in the datasheet, it does show the importance or posting info. (I did post the pictures but did't realized I had to insert them into the posting), thanks again, just ordered the parts, now I hope I don't damage the pads more than how they are already damaged. — Yor1001

Graphics Tablet

I need to purchase the 30 pin LVDS socket for this tablet's connector.

1 Cevap

Yanıtını ekle