Ana içeriğe geç

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1961 Soru Tümünü görüntüle

replaced screen and digitizer in shop now no light

hi all sorry to be a pain but the weekend i took my iphone in to be repaired (local shop) was told board had gone so was scrap so asked if i could use screen on my wifes 3gs as hers had broke "yes" he said after stripping my wifes phone down he found 3g and 3gs use diff size cables and said i would have to have new screen ok i said and paid for new one to be orderd so he put my wifes original cracked screen back on but the back light did not work been today had new lcd and digitilizer fitted still no back light he then changed some coil that he recomended could be problem checked it out i said ok still no back light what could be problem cost me £45 so far and still not fixed but im damed if im going to walk away £45 down and a phone that worked before he changed screen !!!!!

any sugestions what to try would a reset do it or has he just broke my phone and owes me a new one ????

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0


adam, just to make sure I understand correctly. We are talking about a iPhone 3GS with a new LCD and a replaced 6R8 backlight coil. It still does not have a backlight? Is the phone being recognized by iTunes? can you see anything when you angle a light against the screen? Have you checked the contacts on the logic board to make sure they are not bend or broken?


Yorum Ekle

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

adam, first off I recommend a different shop. The one you used should have known that the 3G and 3GS are not identical. Second I am not sure if he changed the backlight coil. See if you are going to get your money back :-) Anyhow, you do have a new LCD and digitizer. Check on the coil 6R8 repair and make sure that it was done right. If the LCD is good, the coil is good than the next issue will be the backlight IC. It is a BGA and needs to be reballed. Not necessarily a DIY'er task.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

adam sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 172