Hi, I have an iphone 3gs 32 gb, i replaced the back housing and the glass screen, everything works but the vibrator, it works fine from setting also I removed the motherboard and installed anotherone and it works just fine. Obvious is a mother board problem. How can I fix it?
Bu iyi bir soru mu?
İtibar: 9,3b
15
7
6
Hi sergio,
For sure, it could be a motherboard problem. However, I would first check on the two pads of the motherboard on which the two vibrator pins are pushed when the motherboard is secured.
Use this teardown guide and take a closer look at step 12. You find the two pads for the vibrator motor to the right of the notch at the buttom of the picture. Is there anything unusual or strange?
Steffen
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 123
1 Yorum
sergio cortez, what exactly do you mean when you say "it works fine from setting " Does that mean you had the vibrator working?
oldturkey03 tarafından