Ana içeriğe geç

All-in-one desktop computers from Apple. iMacs were equipped with Intel processors from 2006-2021.

7425 Soru Tümünü görüntüle

How to connect one iMac to another to check screen

how do you hook up one mac to another mac to check the screen because my intel macs screen does not come on it only makes the ding sound but thats it on on the other the screen works can someone help please.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Use a Firewire cable and connect them. Start the one up that you are having issues with holding down the "T" key. Start the other machine up normally. The hard drive icon should appear on your desktop and you can then run Disk Utilities on it.

Bu yanıt yardımcı oldu mu?

Puan 3

1 Yorum:

How does this verify the screen on the one having issues?

tarafından

Yorum Ekle

Can't be done. Connect to an external monitor from the funky Mac. If you see nothing you have Video Card or Logic board problems. If you see your normal desktop the problem is somewhere in the internal display chain. You can check the Diagnostic LEDs on the funky Mac to see if the video processor is communicating with the display... but you'll have to strip the components out of the machines to test them.

If this answer was helpful please remember to return and mark it Accepted.

Bu yanıt yardımcı oldu mu?

Puan 2

1 Yorum:

BTW Kenneth you've asked the same Question twice... please delete the other one.

tarafından

Yorum Ekle

Yanıtını ekle

Kenneth Sharp sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 103