Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1959 Soru Tümünü görüntüle

iPhone 3GS won't boot at all

My iPhone 3GS won't boot at all. I bought it off of ebay, and it was listed as water damaged. Only the water indicator in the dock connector was active, but the other one at that top of the phone was not active.

I took the phone apart, soaked it in alcohol, gently cleaned it with a toothbrush, and finished it off with CRC electrical contact cleaner. I even removed the logic board shielding during this procedure.

If there's a simple cable I can replace to get it working, I'd be happy to do so. The one cable coming out of the display that doesn't "click" in seems to be burned, or something like that. I've attached photos for reference.

I cleaned up the copper side of the cable, but the back side that appears to have a black dot - I can't clean that side. What cable is this, and is it causing my problems?

Block Image

Block Image

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

I would try a dock connector seems like the battery's flat and the docks broke

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Is there any way to repair the dock connector, rather than getting a new one? I already cleaned a good bit of gunk out of it, and it looks really clean at this point.

tarafından

If the parts not going buy a replacement part it's so cheap

tarafından

Yorum Ekle

Yanıtını ekle

Casey Friday sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 294