Ana içeriğe geç

iPhone'un ilk modeli. A1203 modeli, 4GB, 8GB, 16GB kapasiteye ve alüminyum arkaya sahiptir. Tamir, kayda değer miktarda kanırtıp açmaya ihtiyaç duyar ve lehimleme gerektirebilir.

224 Soru Tümünü görüntüle

Epoxy / glue for back case

The iPhone (2g) case is made of several aluminum parts that have been glued or epoxied together. The bit of aluminum that the head phone jack is screwed to came unglued from my case. Just wondering what would be the best stuff to use to reattach it?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

3 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Fix-All Adhesive is a great all-purpose solvent glue and sealer. It seals and repairs almost any surface easily and quickly. http://www.supergluecorp.com/super-glue/... FixAll

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

I’m very far from the top of the page where you were discussing UltraDome. I have worked with epoxy resin. It yellows…I can live with that. Pretty much. But you really have to have a lot of things thought out very well beforehand or fixing it afterwards is a real DRAG!! and sometimes impossible.

http://www.parsonadhesives.com/partite-p...

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Well i had used Epoxy Seam Sealers for the floor pan bonding in car, it works great. Hopefully it will solve your problem too.

Thanks for the post

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

scampy sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,940