Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1468 Soru Tümünü görüntüle

Can I omit the black rubber and the black felt tape?


I cleaned my fan und exchanged the thermal paste from the cpu and gpu. I did the thermal paste thing with this guide from you:

MacBook Core 2 Duo Heat Sink Replacement

While reassembling I have two problems:

1. the black felt tape from step 13 don´t stick anymore. is that a problem?

2. the small rubber from step 14 don´t stick anymore. can I omit it?

thanks for your great guides!

greetz Hannes

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0


thank you both for your comments!


Yorum Ekle

Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

Mağazamıza Göz Atın

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Those parts are there for a reason. They are insulators and vibration dampeners... you wont like what happens if you leave them out. Use double sticky tape or some other adhesive (you might have to clean the old stuff off) to keep them in place.

If this Answer is helpful please remember to return and mark it Accepted.

Bu yanıt yardımcı oldu mu?

Puan 2


Agreed, you really need to put them back. You could use a spray photo adhesive (which is what I use) to wet the felt and rubber to give it new life.


thank you both for your comments!


Yorum Ekle

Yanıtını ekle

Hannes sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 198