Eşyalarını Tamir Et Topluluğa Katılın Mağaza

2.5 GHz dual-core Intel Core i5 processor (Turbo Boost up to 3.1 GHz) with 3 MB shared L3 cache.

264 Soru Tümünü görüntüle

Seçenekler

Type of glue appropriate for plastic and aluminum?

The clutch cover on my Macbook is loose. It's not bad by any means and certainly not critical, but it's a little wobbly and thus creaks whenever I place my hands on it.

Here's an iFixit pic of the area I'm talking about:

http://d3nevzfk7ii3be.cloudfront.net/igi...

I'd like to dab a tiny bit of adhesive on the clutch cover, but I'm not sure what type of glue is appropriate for the task. Any advice would be appreciated, thanks.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

A dab of epoxy compound (pick your poison there are many) worked in with a toothpick or plastic spatula along the edges would be my recommendation. Plain glue wont stick to itself with strength - but- epoxy is made for that purpose. Ensure that you mix equal amounts hardener and resin - maybe a small bit of glass fiber would help too (don't want to make it bulky but wiggling will reduce the life of the bond).

If this Answer is helpful please remember to return and mark it Accepted.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

Kim sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,281