Eşyalarını Tamir Et Topluluk Mağaza

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203 Soru Tümünü görüntüle

Seçenekler

MacBook won't wake up from Hibernation

I have a MacBook that won't wake up from hibernation mode.

i wanted to drain the battery and let the MacBook go all the way down.

(i needed some voltage informations from the "empty" battery)

removed the battery, made my "stuff" and tried to start the MacBook again - but nothing - it stays dead, i charged the battery in another MacBook, put it in the dead one and nothing.

tried to start it with the powercord & the battery, only with the powercord - but still nothing.

tried it without the topcase (to rule a topcase problem out)

it does not react in any way.

changed the dc-in board - nothing.

one thing i noticed - the magsafe connector does not show anything when plugged to the MacBook (tried several ones) - BUT, when i plug in the magsafe and press the power button, the magsafe connector starts to flash orange (very faint)

any suggestions what in could try ?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
2 Yorum

Is it hibernating or completely off?

tarafından

now - completely off

tarafından

Yorum Ekle

4 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

As good a tech as you are, I'd start tracking it down with a voltmeter, starting at the mag port.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

3 Yorum:

Agreed + Ralph

tarafından

thanks for the tip, i'll try that later (it's 5am - so later will be better)

tarafından

hi richard, i accepted your answer because it was the only way to start handling this issue

tarafından

Yorum Ekle

Seçenekler

Try holding down the option key why you turn the power on. It should come up with which HD you want to boot from, may get you passed the hibernation mode.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

nope - didn't change anything, still dead

tarafından

Yorum Ekle

Seçenekler

here we go again - first of all i want to thank richard for his suggestion - i teared it apart and found something - i have no idea how it happened

i think the pictures are pretty revealing i will get tomorrow something to hold my tiny jeweler magnifier (picters were taken with it and my nokia phone ;-) ) - and then i try to fix it

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

We call that a toasted board ;-)

tarafından

and i call that a challenge ;-)

tarafından

Yorum Ekle

Seçenekler

markus have you tried reseting the SMU and PRAM? Ralph

http://support.apple.com/kb/HT3964

http://support.apple.com/kb/HT1379

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

markus weiher sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 2,939