Model M2453 or M6411 / 300, 366, or 466 MHz G3 processor

73 Soru Tümünü görüntüle

Stripped display screw, can't find parts, any suggestions?

I recently replaced the hard drive and LCD in my Tangerine Clamshell. I've refurbished at least 6 or 7 different clamshells and I guess I was just moving to fast and stripped the right display anchor screw, I'm not even sure what to replace. I've looked through lots of parts. I really don't want to scrap this machine, I bought it brand spanking new. Anyone have any ideas?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

GIVE TOOLS. FIX FOREVER.

GIVE TOOLS.

FIX FOREVER.

Spread the Fixmas cheer.

GIVE TOOLS. FIX FOREVER.

Spread the Fixmas cheer.

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hardware and auto stores often sell "thread chasers" that can clean/recut a stripped thread (don't know how small they go).

Helicoil inserts also fix mugged up threads. (same sources) same size proviso.

There's recutting it one size up, and the ever popular super glue, bondo, expoxy glue.

If this Answer is helpful please remember to return and mark it Accepted.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Samuel Osborne sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 65