Eşyalarını Tamir Et Topluluk Mağaza

Guides and repair information for Power Macs (previously known as Power Macintosh) including G3, G4, and G5 models.

447 Soru Tümünü görüntüle

Seçenekler

Boot Chime, but no video on monitor.

After changing my PRAM battery, the powermac booted up normally showing me a question mark on the screen. Turned it off and turned it on again after a short time, however this time it started up but nothing showed up on the monitor. What could this be ?

Thanks

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

The first question mark showed that it could not find a operating system. Either corrupt system folder or a failed hard drive. I would check and reseat the video card. A black screen can also result from a drained battery or improperly installed battery.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

Yes that is when i turned off the mac to get an OS to try and install it. Tried reseating the video card but no luck. Tried taking out the PRAM battery and putting it back in but no luck. Before when i had the dead battery, it wasnt doing the chime, but now it is. Could it still be the battery ?

tarafından

Hook up another machine to the monitor and see if it has failed.

tarafından

Yorum Ekle

Yanıtını ekle

julianbugejacoster sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 518