A 6 megapixel camera in Panasonic's Lumix series released in 2006.

4 Soru Tümünü görüntüle

What tools are required to dismantle it?

Hi

I was trying to dismantle this camera on the weekend to clean the sensor.

I was going well, managed to remove all the minute Phillips head screws and got the back off. Then I came unstuck. There were 3 really small Torx screws holding the sensor cover on. My smallest Torx driver is in a kit I brought from you for Mac repairs, it is a size 6. Any idea what size these in the camera may be? And do you have a kit with the smaller size Torx drivers?

Thank you

Keith

PS It is a fantastic camera but obviously has dust/pollen on the sensor as there are "splodges" on the screen and on photos that move around.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1

Yorumlar:

I was looking at toolkits the other day and could only find one with drivers down to Torx5. Today I looked again and found one down to 4. The question is, will 4 be small enough? Anyone with any experience with these cameras?

tarafından

Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Keith, the service manual lists it as a Torx 3, and for availability on ifixit, contact them directly at http://www.ifixit.com/Info/contact

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Keith sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 5

Her zaman: 763