Ana içeriğe geç

Released October 2008 / 2.4, 2.53, 2.66, 2.8 or 2.93 GHz Core 2 Duo Processor

376 Soru Tümünü görüntüle
Soru Kapandı

No Wifi Hardware installed, but bluetooth works

I've been having this problem for some time, and i recently found a ray of hope ( I think).

So my wifi card was giving me problems before after a fall from my MBP. Then, the display got dislodged from the upper casing, but my wifi was working just okay. Progressively, the wifi started getting spotty and i'd have to close and open the lid twice or thrice to get it started again, and finally one day - "No Wifi hardware installed".

Now, i managed to recently stick the display back in after getting rid of a ding on the side.

Weirdly, the bluetooth starts working now. Am i hoping for too much to expect my wifi to start working again?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

I suspect you severed the WiFi & Bluetooth connection lines that go through the hinge area to the lid where the AirPort card is located. So when you move things about you are managing to reconnect things.

It's a bit of work to replace the cable harness IFIXIT guide to replace harness. So you might want to think about using an external USB WiFi and/or Bluetooth interface as being cheaper solution.

Or you could just replace the entire lid assembly IFIXIT Guide give the face the display keeps popping out and you have a few dents.

MacBook Pro 15" Unibody Late 2008 and Early 2009 Display Assembly Görseli

Kılavuz

MacBook Pro 15" Unibody Late 2008 and Early 2009 Display Assembly Replacement

Zorluk:

Orta

30 minutes - 1 hour

MacBook Pro 15" Unibody Late 2008 and Early 2009 Display Data Cable Görseli

Kılavuz

MacBook Pro 15" Unibody Late 2008 and Early 2009 Display Data Cable Replacement

Zorluk:

Çok zor

1 - 2 hours

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 4,891