Released October 2008 / 2.4, 2.53, 2.66, 2.8 or 2.93 GHz Core 2 Duo Processor

451 Soru Tümünü görüntüle

Need to replace mic connector on logic board

I was removing the logic board and broke the microphone male connector. The picture is here

Block Image

. The connector is where the spudger is.

Here is another pic.

Block Image

I know it is a mic and not really needed, but would anybody know where I can buy that little connector?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

Mağazamıza Göz Atın

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

A work around would be to purchase a USB microphone (or a USB voice quality headset & mic).

Soldering logic board components is not a DIY project… it's not like soldering a light cord. You need special tools, solder and lots & lots of practice.

I suggest you check with a local computer/small electronics repair shop. Any shop that would undertake such a job should have a source for such parts, or could solder the connector permanently to the logic board.

If this answer is acceptable please remember to return and mark it.

Bu yanıt yardımcı oldu mu?

Puan 1


I have access to professional techs that can solder for me - just need to find the part & a place I can order. I work in the electronics industry.

Are there any places online or shops that I could contact? I'll need to find a place that gets into the details - a "genius" is going to tell me to replace the logic board, so I do not know a local place.


I don't have any sources… if you can't find a connector soldering it permanently would work.


Yorum Ekle

Yanıtını ekle

laradanielss sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 1

Son 30 Gün: 1

Her zaman: 180