Ana içeriğe geç

Model A1288 / 8, 16, or 32 GB capacity

451 Soru Tümünü görüntüle

2nd Gen iPod won't turn on after replacing Lcd and digitizer.

I recently bought an ipod touch 2nd Gen with a broken screen thinking it to be an easy fix. When the pieces arrived it and I replaced the old LCD and digitizer I noticed that the ipod wouldn't start. I tried everything to get it to turn on, I used different chargers, but I couldn't even get the dead battery logo.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:

After LCD replacement it requires a reboot.

Press home button and power button while its connected to charger until you see apple logo or battery charging image. Normally 20 seconds enough.

I hope power button and home button works well todo that. You can not be sure about home button since it came with new digitizer.

Good luck ...

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Josue Zuniga sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 101