Ana içeriğe geç

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203 Soru Tümünü görüntüle

Reinstalling the MacBook top case

I need help aligning the clips over the super-drive to install the top case again. I recently cleaned the heatsink and fan, and cant seem to get the top case perfectly attached over the super-drive. It has a very large bulge over it.

Thanks!

P.S: I also redid the thermal paste with Arctic Silver Ceramique, and the idle tempatures went down on the CPU. However, the Chipset seems 1 to 2 degrees higher. Could someone please state their idle temps on their Late 2007 MacBook?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 2
2 Yorum

Have you got all the plastic clips over the superdrive in place and the right way round?

tarafından

What is the correct way? Away from the outside of the mac, or pushed up on the side?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

The open side points into the machine. If you need a picture you can mail me: info@re-mac.de

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

Thanks! I see they must be open and not locked!

tarafından

Yorum Ekle

Yanıtını ekle

Zenitar sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 5,038