Eşyalarını Tamir Et Topluluk Mağaza
Onarım Topluluğuna Katılın - Hesap Oluşturun

Model No. A1367 / 8, 16, 32, or 64 GB capacity

20 Soru Tümünü görüntüle | 17 Parçalar Mağaza

Seçenekler

Screen won't attatch completely

My screen cracked a while back and I wanted to do the replacement my self. I did everything right, I tested it and it works fine. I'm on the last step of attaching the screen but it won't attatch completely. The left side lays flat perfectly fine but the middle right doesn't. It's still lifted up, like there's something underneath but I don't see anything. The metal plate beneath looks level. Idk what it could be, I don't want to risk cracking it by pressing really hard down on the screen. Any suggestions?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

you will crack it if you press too hard, it should lie perfectly flat by itself.

there are several thread here that address that if you search for them, but in essence:

1.) Dremel tool any corner dings or it will never fit.

2.) Consider removing the metal bracket to get a better fit.

3.) Make sure all the screws are in their right places--the slight variations in height is sometimes responsible

4.) Make sure the metal bracket is seated properly, and check that the dock connector and headphone jacks are not interfering.

And know that you are not alone---getting the iPod screen flat is a PITA!!!

jessa

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

autumn sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 79