Eşyalarını Tamir Et Topluluk Mağaza

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203 Soru Tümünü görüntüle

Seçenekler

More unfortunate problems-top case

Well, thanks to the helpful community here I got the top case attached properly. However, in the process of removing the top case, it seems that it is now damaged. The KB and Trackpad did not work. So I disassemble again, then the power button does not work. I examine the ribbon cable, and it has a crack running through it where it folds, and it was clearly cut.

I realize I have no other option but to buy another top case, but I just thought that I would post here to see if there is any specific thing I should do to protect the new top case.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

3 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

The main thing is to go slow and use care when handling ribbon cables. They are notoriously fragile and can be easily broken. Good luck with your new top case. Ralph

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

If it is a Unibody then you have the replace the top case I think. Ralph

tarafından

I think the SR stands for the Santa Rosa processor and the cable link you gave is valid. Bravo +

tarafından

Yorum Ekle

Seçenekler

Surely you can find just the cable. See if you can spot a part number on it.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

1 Yorum:

If your MacBook is NOT a unibody then mayer is absolutely correct. Here is the link to the part. + Ralph

MacBook Upper Case Cable

tarafından

Yorum Ekle

Seçenekler

Just another hint: When replacing the topcase, blow out the socket on the logicboard using compressed air, because its easily zapped by statics or shorts.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

Zenitar sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,511