Eşyalarını Tamir Et Topluluk Mağaza

1.6, 1.8, or 2 GHz G5 processor

131 Soru Tümünü görüntüle
Soru Kapandı

Seçenekler

iMac cpu fan running at 4400RPM after 20 minutes of use?

Hi,

My iMac G5 (Powermac8,1) cpu fan is running at 4400RPM after 20 minutes of use. It doesn't matter what I am doing.

I have zapped the pram, blew out the iMac with compressed air and have reset the power management unit.

Could the cpu need to have a new layer of thermal paste applied?

System Fan 1240 RPM

CPU Fan 4400 RPM

Hard Drive Fan 1800 RPM

HD 50º Celsius

CPU 62º Celsius

Hard Drive 47º Celsius

Please help this fan noise is too loud to work on the computer.

Thanks,

MaxTek

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Your CPU is running hot so it likely does need a new coat of thermal paste (also the age of the system warrants it as well).

A quick blow of can'ed air in its self won't do to much. Often you need to do some scrubbing with a soft painters brush (Don't forget about ESD). The heat sinks, fan blades and the power supply often need it the most.

Follow the IFIXIT guide iMac G5 17" Model A1058 Logic Board Replacement

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

Thanks. I will tear it down and try that.

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 146