Ana içeriğe geç

Model A1237 or A1304 / 1.6, 1.8, 1.86, or 2.13 GHz Core 2 Duo processor

375 Soru Tümünü görüntüle

Magsafe DC-in board moving? A1304


The screws on the Magsafe DC-in board of my Macbook Air A1304 hold the board down to the case but not rigidly. In other words the board can still move around a bit. Is that normal? This laptop belonged to someone else previously and I have a feeling that they opened it. It's almost as though there should be some washers on the screws or does the board have to move around slightly?

Any help would be much appreciated!


Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

A tiny (millimeter) bit of play is acceptable, more (centimeters) not good… continued flexing could eventually break wires or connector. Metal gets stiff with repeated flexing and will crack.

If this answer is acceptable please remember to return and mark it.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Don sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 217