Sixth iteration of Apple iPhone, announced on September 12, 2012. Repair of this device is similar to the previous models, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 32, or 64 GB / Black or White.

3297 Soru Tümünü görüntüle

Signal loss after LCD swap iPhone 5

Has anyone experienced any loss of signal after replacing the LCD assembly? I just swapped mine out and now my phone will not go any higher than 3 signal bars..

I have done reboots & reset all network connections.

Just curious if there are any contacts I may have touched to caused this? Similar to iphone4's wifi & 3g.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Make sure you didn't touch the lower half of the logic board

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

I'm pretty certain I did not touch anything.. I was unable to put the metal plate that goes over the LCD connectors. I could not for the life of me get it screwed in without the lower cable popping out.

Hope that is not the cause..

tarafından

Hook up the bracket from the left side.

tarafından

Yorum Ekle

Yanıtını ekle

Steve sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 135