Eşyalarını Tamir Et Topluluk Mağaza

iPhone'un 5. jenerasyonu. Cihazın onarımı basittir; tornavidalar, kanırtma aletleri ve sabır gerektirir. GSM/CDMA / 16, 32 ya da 64 GB / Siyah ya da Beyaz.

2193 Soru Tümünü görüntüle

Seçenekler

Silent/lock button causes intermittent vibrate

Hi all,

Odd one; keeping the Silent/lock button in the off position seems normal. Once the button is switched to silent/lock mode it activates and displays the transparent logo with a line through it, meaning the mode is active, thats normal too. However, intermittently the logo will show again with a vibration showing its now off, and then again with a vibration to show its on again, this continues at random intervals and sometimes multiple vibrations and logo flickers.

Anyone had this before? - I've checked the vibration module but not the headphone jack flex assembly yet, just want to make sure I'm not missing something before I open up.

Quick bullet point summary:

• Vibrate/silent switch intermittently vibrates and displays silent logo once switched on.

• Vibrate/silent switch physical movements seem solid.

• All other buttons work OK.

• Headphones working OK.

Thanks!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 2
Yorum Ekle

3 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

It sounds as if the flex cable as went a tab faulty a new flex should sort out your problem that's the first step in the trouble shoot..

Oh you could also just restore to rule out corrupt software

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

thanks con, thought so, will tear down and check connections, rebuild. If no good ill replace the flex. :)

tarafından

No probs if changing the flex doesn't work your probobly dealing with a motherboard issue.

tarafından

Yorum Ekle

Seçenekler

Will, Can you give me information about did changing flex cable solve the problem or not? If not what did you do to solve problem? Thanks.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

Sorry, yes - I had changed the flex cable and ensured the vibrator motor was seated correctly touching the contacts (and that no other dust/elements where making contact with them)

All seems ok now, thank you!

tarafından

Yorum Ekle

Seçenekler

Hi, I have the same problem. This flex calbe I have to change, could you tell me what that is?

Thanks

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

The volume button ribbon cable which has the the vibrate / silent switch connected to it as well.

tarafından

Yorum Ekle

Yanıtını ekle

Will sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 9

Her zaman: 6,202