Ana içeriğe geç

Model A1200 with 2.16 or 2.33 GHz Core 2 Duo processor

138 Soru Tümünü görüntüle

pram battery housing broken, computer does not start, power lights up

is there a login board or pmu reset button on a iMAC 2111

The PRAM batter holder is broken at the bottom edge and will not hold in a 2032 battery without falling out.

Is there a fix for the holder?

I have a possible lame solution but I want it fixed right.

The bottom edge of the holder broke out when installing a new battery.

I have done this for years and I know .

what I am doing The plastic was weak and the holder appears to be an Apple inferior product I will eventually post pictures of this poor battery holder that apple created

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1

Yorumlar:

Super thin plastic must have become brittle with age. I cut enough of the clear plastic from the formed retail package for the replacement battery and carefully superglued in place to the original black housing. This made a pouch of reinforcement for the pos part.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

I believe that part is now made by the Frito-Lay Company. The Cracker Jack brand has been owned and marketed by Frito-Lay since 1997

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

David Raymond sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 200