Ana içeriğe geç

Late 2011 model, A1278 / 2.4 GHz i5 or 2.8 GHz i7 processor.

591 Soru Tümünü görüntüle

screen won't turn off when closing lid

Just changed the MagSafe DC-in board, followed every step on guide, now my screen won`t turn off when closing lid. How can I fix it?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

Check your ribbon cables. It sounds like one is not correctly seated.

I would check the hard drive cable first as it has the sensor attached to it. Review Step 26 in this IFIXIT guide MacBook Pro 13" Unibody Late 2011 Upper Case Replacement

Bu yanıt yardımcı oldu mu?

Puan 3
Yorum Ekle

The screen sleep magnet could of slipped out of place or energy saver could be set to "never sleep". You could also try to reset the SMC---http://support.apple.com/kb/HT3964.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

I have the same problem with sleep mode.

SMC reset and replacing sensor without success.

BTW I don't know how to replace the sensor of sleep LED and lid. Can anybody help me?

Bu yanıt yardımcı oldu mu?

Puan 0

5 Yorum:

What sensor do you replace?

tarafından

Replacing Ribbon Cable from HDD with IR Sensor and LED. But i don`t know, where sitting the sleep sensor

tarafından

The lid sensor is a small Hall effect transistor which is mounted on the ribbon cable assembly you replaced. It is part of the plastic bracket where the the IrDA sensor is located. It you take a steel paper clip and slide it across the left sides of the displays edge of the lid you'll locate the magnet which mates up with the Hall effect transistor in the case when the lid is closed.

tarafından

how he looks the effect transistor ?

tarafından

Please review this: Hall Effect transistor

tarafından

Yorum Ekle

Yanıtını ekle

Francisco Hood sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 8

Her zaman: 9,542