Ana içeriğe geç

The wi-fi only version of Apple's iPad Air, model number A1474. Available in Space Gray or Silver, it packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

299 Soru Tümünü görüntüle

connecting charging port ribbon cable to circuit board

How does the charging/docking port ribbon cable secure to the circuit board the ribbon cable seems like it was glued with epoxy or somthing .not sure ..way to small for solder..it was originally attached flat to the board...

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

The charging port ribbon cable comes with it's own adhesive, so it can be glued on.

You can see the link of dock connector flex cable replacement, the area with blue film is where the adhesive on.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

I had to remove the motherboard to check this out the other day. It is soldered to the board. Not glued.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

greg sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 755