Ana içeriğe geç

Model A1059 or A1099 / 20, 40, or 60 GB hard drive / touch sensitive click wheel

227 Soru Tümünü görüntüle

Installed 2nd battery but won't charge. Bad internal charger?

The "Possibly Related Questions" box contains existing text I can't erase.

Re iPod 4th Generation:

Charge graphic blinks and indicates a charge in progress but never happens. I've left it charging for several hours; No charge. I'm sure the battery is not defective.

Is there an internal charger part that could be defective? And is it a replaceable part?

Thank you

Crocdog

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Crocdog, try to charge it with a Firewire charger. Check to make sure that your dock connector is clean, no debris, bend or corroded pins. You can also check the battery connector with the iPod plugged in to see if you receive any power from that. It should be around 4.2V-4.6V. Check the dock connector with a multimeter and see what voltages you get. The pinout for the dock connector can be found here. Yes, there are plenty of charging components on the logic board. All of them are SMC and would require a sound knowledge of soldering as well as the right tools. Hope this helps, good luck.

Bu yanıt yardımcı oldu mu?

Puan 1

2 Yorum:

Re: Crocdog charging the A1099 /20GB Ipod

Thank you O.T.03!

The docking connector answer worked perfect. It charged right up away.

The poor thing is now healthy and holding on to a charge...Saved from the bone yard!

Thanks again...

Crocdog

tarafından

Crocdog, you are welcome. Best of luck to you.

tarafından

Yorum Ekle

Yanıtını ekle

Crocdog sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 397