Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

579 Soru Tümünü görüntüle

Logic Board or Power Supply or Hard disk Failure?

Hi all,

My iMac EMC 2210 is unable to boot at all.

Trying to find out whether it's a logic board or power supply failure.

I have just replaced my hard disk approximately 1 year ago but I am not writing it off the equation.

Pressed the power button but has no chime nor visual.

I could hear the fan sound (but couldn't be sure if it's the fan or hard disk).

Any guidance is greatly appreciated.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

Yorumlar:

Update / Additional Info

I left the iMac off for a couple of hours and managed to boot it for now.

Is it overheating ?

tarafından

Can you give us the last three digits of your systems serial number so we can correctly identify your system.

tarafından

Hi Dan,

Thanks for the prompt reply.

Last 3 digit of serial is ZE3

Model 1224 , EMC 2210.

Didn't manage to use Temperature gauge pro due to my comp is officially dead once more.

tarafından

Apple iMac "Core 2 Duo" 2.66 20-Inch (Early 2008) Specs

Identifiers: Early 2008 - MB324LL/A - iMac8,1 - A1224 - 2210

tarafından

Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

To check if the system is over heating you'll need to install an app which can read the fan & temp sensors in your system. Give this app a try: Temperature Gauge Pro There are others but I have found this one to be one of the best. Let us know what you find after running it.

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Hi Dan, Thanks for the prompt reply. Last 3 digit of serial is ZE3 Model 1224 , EMC 2210. Didn't manage to use Temperature gauge pro due to my comp is officially dead once more.

Chee Yong Koo, 11 hours ago

Apple iMac "Core 2 Duo" 2.66 20-Inch (Early 2008) Specs Identifiers: Early 2008 - MB324LL/A - iMac8,1 - A1224 - 2210

tarafından

Starting to should like your power supply has issues. At this point I think you'll need to open the system up to inspect things. Are you up to that? Review the IFIXIT guides and setup your work area if you haven't already.

tarafından

Yes, I am ready to open up. Any guide is appreciated.

tarafından

Follow this link: iMac 20" repair guides

tarafından

Thanks for the guide.

I have no issues replacing the hardware as required but the main issue here is that I couldn't rectify if it is a Power Supply failure or Logic Board.

Any ideas?

tarafından

5 daha fazla yorum göster

Yorum Ekle

Yanıtını ekle

Chee Yong Koo sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 247