2.0GHz, 2.3GHz, or 2.6GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.8GHz) with 6MB shared L3 cache.

274 Soru Tümünü görüntüle

Ever see that contact with liquid damaged in this way?

Ever see that contact with liquid damaged in this way?

Block Image

Block Image

Could anybody identify what caused it?

Any suggestion?

Thank you very much.

Regards,

G.

Update

Thank you Oldturkey03, please excuse my english, its terrible for doing technical questions.

The apple service told me something like this:

Unit was in contact with liquid (possibly wine), especially severe marks on the logic board (motherboard). Thorough cleaning was performed. Unit runs but a short circuit on the connector and logic board IOBoard found. The only thing that does not work on the unit's right side (USB connector, HDMI and SD card) and IOBoard logic board damaged wire.

But then they told me:

We contact you to notify you after a second check the unit does not respond. The computer turns on but no picture.

Logicboard and the topcase are probably damaged by the effects of liquid

Do you think that there is something that i can do to repair it?

Than you very much for your help.

Regards,

Germán.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

germanluongo, I am not exactly sure of what your question is. That particular contact is one of the contacts that connects to ground. Any component failed in that part of the HDMI Redriver (on RIO) circuitry can cause this.

Block Image

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Thank you Oldturkey03, please excuse my english, its terrible for doing technical questions. Please check the update.

tarafından

germanluongo, your English is fine. Yes, looking at the schematic I can see why your HDMI is no longer working. you will have to replace the connector as well as the cable to possibly get fixed. Hopefully it just shortened the connector not the board.

tarafından

Yorum Ekle

Yanıtını ekle

germanluongo sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 772