Model A1224 / Early 2009 / 2.66 GHz Core 2 Duo processor

111 Soru Tümünü görüntüle

Display problem after installing optibay

Hi Experts,

After following the DIY for installing Optibay with an SSD which went fine, i got problems with the LCD.

After reassembling everything and starting the display was a little pinky and have noise like an old TV.

During the installation and reassebly I've checked all cables and connections carefully. Everything looks fine.

Please help!

Thank you in advance!

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Sounds like your GPU has a problem. Did you use proper ESD precautions? Have you tried connecting an external monitor to your system to see if it too is effected?

In the meantime you could try resetting the NVRAM as well as try running AHT. Here's a Apple TN that will guide you for both: Startup key combinations for Intel-based Macs.

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Hi! NVRAM reset helped! Thank you for the hint.

tarafından

Yorum Ekle

Yanıtını ekle

tporczio sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 88