Ana içeriğe geç

display on/off-sensor placement / clamshell mode

Hi .. I want my MacBookpro to run in permanent clamshell mode without needing to close the display. I thought I could just trick the open/close sensor system or so

any idea? where is that bugger, in the hinge?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

4 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Located on the back of the right side of the keyboard, about in the middle.

It is commonly called a reed switch. By sliding a paperclip along the bezel bottom you can locate the magnet in the bezel. Placing a magnet on the top case in the correct position will "sleep" the display.

If this answer is acceptable please remember to mark it.

Good Luck,

N.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

Genius. Trying to figure this out for years. Even the IT guys I was working for didn't know.

tarafından

Yorum Ekle

I have a MBP with a busted screen (backlight working). It's hooked up to a studio diplay that is configured as main monitor in system preferences. The MBP display doesn't do a thing now, neither open or closed. No need to trick any sensors.

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

but is it still in the system prefs? i hate saerching for windows that are located on a second screen thats switched off

tarafından

Once the external display is configured as main all windows are displayed on it.

tarafından

Yorum Ekle

ok .. it seems to be in the screen on the right side of the camera and the little hook thingy that keeps the cover down. attaching a magnet there sends my MacBookpro to sleep

thanks machead3

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Had this happen on an A1278; couldn’t figure out why. Magnetized USB connectors were the problem. Demagnetize them with something like this: https://amzn.to/2CEM4pJ

There are 4 strong N or S domains on the upper display border by the camera, starting about 2” from the outer edge of the display clamshell and ending about 3-4” inches in, on both right and left sides. This makes me think there’s either 1 or 2 clamshell sensors (hall or reed type) in the palm rest on either side of the trackpad.

pmset -g log:

Display is turned off

Entering Sleep state due to 'Clamshell Sleep' …

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

kay k sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 4,270