Ana içeriğe geç

The Sony Xperia Z is an Android based phone that was released in 2013. It is one of the largest phones of the Xperia family with a 5-inch full HD display. Model numbers include C6603/C6602.

98 Soru Tümünü görüntüle
Soru Kapandı

Ways To find out damaged PCB?

When the phone is put on charge, the charging indicator lights up for about 2 seconds before goin off. The screen does not turn on. So is there a way of finding out if the PCB is damaged other than replacing one?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
2 Yorum

What have you tried so far? Does it charge your battery?

tarafından

I feel the battery getting a bit warm after about 10-15mins of charge time. But since the phone doesnt switch on, i cant really see if the battery is getting charged or not.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

farhan, start with a new battery. That will give you a known-good part for further troubleshooting. It could be the charger, the cable, the charging port or the charging coil on the logicboard as well as a firmware issue....start simple and work your way up. Hope this helps, good luck.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

thanks.. will try that and see how it goes. and what if the charging coil on the logic board is damaged?? is there a way of replacing only that?

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 714