Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3252 Soru Tümünü görüntüle

iPhone flickers after LCD replacement

Hi, yesterday I replaced my LCD/Digitizer. Now it blinks a little, just in the borders of the screen and it seems that it occurs only when I turn the screen on and it stops a few seconds later. Any idea?

Thanks

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi, it could be just the screen replacement itself. Often they are cheap copies of genuine products and simply do not quite cut the mustard! If all is working well and you can put up with it, carry on; if not try opening up the device again to check connectors/seals etc and possibly look to try a known working screen in your phone to help rule out any other possibilities causing the issue.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

Thanks for the reply, I'll risk and try another screen so I can check if the problem is with the new screen or some connector.

tarafından

Yorum Ekle

Yanıtını ekle

nunosilvamourao sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 137