Sixth iteration of Apple iPhone, announced on September 12, 2012. Repair of this device is similar to the previous models, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 32, or 64 GB / Black or White.

3298 Soru Tümünü görüntüle

Measure hardware home button. Internals are OK.

Isn't the home button just short circuiting the two pins?

Should't i be able to measure that on the flex cable from the home button? When i press the button, it should shot circuit right? Nothing happens :-/ Tried some old reference screens i had, same result.

If i short circuit the two pins in the iPhone with a screwdriver or anything metal, it works.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

Yorumlar:

Ordering new home button flex, hopefully that will solve my problem.

tarafından

New flex did the job. Apparently the new screen came with a dead home button flex :(

tarafından

Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Try bending the two metal prongs up slightly if they are to low then they won't make contact with the home button

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

Tried it, no success :-/

tarafından

Yorum Ekle

Yanıtını ekle

Klaus M sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 105