Ana içeriğe geç

The third generation of the Apple iPad, released on March 16, 2012. Full 4G and Wi-Fi model repair guides. Repairs require heat and careful prying. Model numbers: A1416, A1430, and A1403.

312 Soru Tümünü görüntüle

Digitizer causing multi and phantom touches.

About a year and a half ago I cracked my digitizer, I replaced it myself and it has worked fine since then. Recently though I have been getting multi touches (press Z and get zzzzzzzz) and phantom touches randomly dragging and touching my screen.

I took it apart and cleaned both sides with a cleaning cloth. The ribbon looks fine, and contacts look fine but the problem still persists. I'm unable to figure out what other problems it could be.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

The digitizer can just go faulty if with a small drop and I assume you replacement screen was a copy screen so it's likely to go faulty and not as resilient as an original screen

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Philip Bremer sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 90