Eşyalarını Tamir Et Topluluk Mağaza

Guides and repair information for assorted graphics cards, also known as video cards, graphics adapters, or display adapters.

110 Soru Tümünü görüntüle
Soru Kapandı

Seçenekler

Relationship between AGP Processor and mother board processor

I have an old version of a home PC...which uses an Intel 600Mhz processor on a pentium III motherboard.

I have also added a graphics Creative Savage 3D savage 4 on the AGP slot..things are quite normal as they have been for the past almost ten years.The AGP card uses a pentium 2 processor on its board.

I would like to know if i can chnage my AGP card to the newer versions, like NVidia,which can handle graphics processor speeds of more than 1 Ghz, which is higher than my main CPU speed .

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

3 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

I never tried it, but i think your old pIII have a agp x4 port, that would be ok for "newer" graphic cards with something like a NVIDIA GeForce 7600GT.

System Requirements for the card above are like this:

* Intel Pentium III, AMD Duron or Athlon class processor or higher

  • 256MB system RAM
  • A minimum 350W / 400W recommended power supply
  • PC with one free 4x or 8x AGP graphics slot available on the motherboard with full size expension slot
  • 50MB of available hard disk space
  • CD-ROM or DVD-ROM drive to load the driver or download it online.
  • DVI or VGA compatible monitor
  • Support for Windows 2000/XP/Vista/Windows 7 or above system

so check whats inside your computer and if you want a specific card - check if there are drivers for your operating system available

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Seçenekler

I don't see any reason why not, but I wouldn't really spend too much on it. AGP is an old standard, so you won't be able to put it in a more modern PC later.

The P3 should support most cards, but try to get one that doesn't need a 6pin power connector. I wouldn't worry too much about the power supply, although yes, everyone will fuss over it :P

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

3 Yorum:

Good answer, but you do realize that this question is over 2 years old

tarafından

I didn't realize that. I only started using iFixit two days ago (because I was bored) LOL

tarafından

Larry Chen, trust me, happens to all of us:)

tarafından

Yorum Ekle

Seçenekler

I didn't realize that. I only started using iFixit two days ago (because I was bored) LOL

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 3,605