Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

174 Soru Tümünü görüntüle

I can't fit my glass in properly. What should I do?

I was replacing an iPad 3 screen for a customer when I was putting the new screen back on. I put some pressure on a stubborn corner when the glass cracked. I noticed a small upward bend in the aluminum right where it is cracked. Is there any way I will be able to properly close the glass? Or will it have to be slightly open in that corner?

Please look at the following pictures to clarify what I mean:

Block Image

Block Image

Block Image

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hello if the casing has a bend in it you could try to bend it back into shape very carefully with pliers

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Alright thanks I'll do so. Any tips?

tarafından

Yorum Ekle

Yanıtını ekle

John Hilder sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 78