Ana içeriğe geç
Soru Kapandı

Why does my Mac sound like rebooting without the chime?

After I boot-up or reboot my A1150, it keeps on making the reboot sound without the chime, i.e. the whirring/grinding noise. If I run my defrag programme it disappears. Very tedious!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Depending on the age of your HD it may be failing or getting ready to fail. Keep a current backup, and check the SMART status of the drive.

Running Apple Hardware test may also provide some information.

Some anti-virus, or backup software can also cause a lot of drive reading/writing. Applications->Utilities->Activity Monitor may be able to identify which App is being active.

If this answer is acceptable please remember to return and mark it.

Bu yanıt yardımcı oldu mu?

Puan 1

2 Yorum:

Thanks, mach. I replaced the HD about 18 months ago as the original was just about at capacity. Current HD is 500 GB and only 10% used, BUT.........I took a tip which I might have read here, which said take the RAM chips, clean the contact strip and re-install in reverse order, i.e. move each chip into the other slot. Seems to work fine! Got to love these temperamental Macs!

tarafından

Could be your environment, humidity and dust can get inside these boxes fairly easily and over time you start to see some light corrosion causing problems.

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 91